C4 Dual USB-C 3.1 + USB-A 3.0 square flange receptacle

No items found.

GT Contact WATERPROOF Industrial Connectors
Rugged and built for high IP protection levels
Operating temperature range: –40 to +85 °C / –40 to +105 °C

- Designed for outdoor environments: marine, industrial, electric vehicles, video surveillance, remote controls.
- The rear potting of the contacts prevents liquid ingress even when the connector is unmated.
- Wide selection of sealing caps
- UV-resistant
- Multiple customization options
- UL approvals available (depending on model)

Use the dropdown menu to select the rear panel configuration.
For additional customizations, contact us.
*Custom cable length available

‍

C4, Flange Receptacle, USB 3.0, USB A, usb type-c

Per cablaggi completamente personalizzati consulta la sezione Cavi Costampati

Seleziona

FFC Presentation Card

Consulta il Catalogo Brady

	Technical Data
Insulation Resistance	DC500V±10%, test for 1 minute and the insulation resistance should be more than 1000 M Ohm
Dielectric Withstanding Voltage	500 V DC/AC peak, contact-to-contact, for 1min; 750 V DC/AC peak, contact-to-test panel or contact-to-shield for 1 min.
Contact Resistance	30m Ohm at 10mA Max.
Durability	1500 cycles, rate of 200 cycles per hour.
Thermal Shock	5 cycles at -40°C / +105°C, after the test, the function and appearance can’t be impacted.
Waterproof Test	Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects Test duration: at least 15 minutes Water volume: 12.5 litres per minute Pressure: 30 kPa at distance of 3 m
Visual and dimensional inspection	Must meet or exceed the requirements specified by the most current version of the USB specification.
Insertion and withdrawal forces	Speed: 10 mm/s maximum; Insertion: 35 N maximum at a maximum rate of 12.5 mm (0,492 seconds) per minute. Withdrawal: 10 N minimum at a maximum rate of 12.5 mm (0.492 seconds) per minute.
Physical shock	No discontinuities of 1 microsecond or longer duration when mated USB connectors are subjected to 11 microseconds duration 30 gigaseconds half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random vibration	The electrical load conditions shall be 100mA maximum for all contacts. Frequency: 50 to 2000 Hz PDS: 0.04 g² /Hz. Duration: 1 Hour/Axis, 3 Axes Total. g’s: 7.56 g rms
Temperature life W/O electrical load	85°C for 96 hours
Low temperature	-40°C for 96 hours
Temperature humidity cycling	4 cycles at 25°C / +65°C 95%RH (1 cycles/day)
UV exposure	24 hours equal 1 year: 8 hours UV at 70 °C (± 3) Black Panel Temperature 4 hours condensation at 50 (± 3) Black Panel Temperature

	Material
Panel Housing	PPS
USB Receptacle Housing	PBT
USB Receptacle Contacts	Copper Alloy, Au Plating
USB Receptacle Shell	Copper Alloy, Ni Plating
Rubber pad	Silicone
Screw gasket	EPDM
Glue	Epoxy
Panel Cap	Pa66
Spring	SUS
Screw	SUS
Rivet	Aluminum

Subscribe to the newsletter

C4 Dual USB-C 3.1 + USB-A 3.0 square flange receptacle

C4 Dual USB-C 3.1 + USB-A 3.0 square flange receptacle

Configuratore Cavi FFC

Related Products

C3 USB-A 3.0 Metal Plug Screw Type

C3 Micro USB-B 3.0 Plastic Panel Screw Type

Connettore circolare da pannello presa USB 3.0 TRS

Cavo lan patch RJ45 tondo OD2.8mm CAT6

Request information for